Filter
Top Products
11
Before Use
[ EVF or LCD Monitor ]
1POWER
2MENU
3, 4
JOG KEY
Before Using
If no operation takes place for approx.
10 minutes after the AC Adaptor was
connected to the Palmcorder and the
POWER Switch was turned to CAMERA
without inserting a Cassette, the
Palmcorder is automatically set to Self
Demo mode for introducing its function.
To turn it off, follow steps 1~4 below.
Before you begin
• Connect the Palmcorder to a power
source. (pp. 14, 15)
1 Set POWER to CAMERA.
2 Press MENU to display the CAMERA
FUNCTIONS menu screen.
3 Rotate JOG KEY to select OTHER
FUNCTIONS , and press JOG KEY to
display the OTHER FUNCTIONS menu
screen.
4 Rotate JOG KEY to select DEMO
MODE , and press JOG KEY to select
OFF.
• Press MENU to exit.
• If any button is pressed or operated
(except PLAY/MULTI and ZOOM), the
Self Demo mode is canceled.
• The Self Demo mode can be started by
setting DEMO MODE to ON and by
exiting the menu.
To turn Self Demo back on:
• Set to DEMO MODE : ON in MENU
screen.
Note
Self Demo Mode
DV103.p 9-11.p65 03/02/07, 10:4711