Filter
Top Products
25
Manual Iris Adjustment
(F Number)
You can use this function when the screen is too bright or too dark.
1
Set the Mode Selector Switch to [MANUAL].
≥The [MNL] Indication
1
appears.
2
Press the [PUSH] Dial repeatedly until the Iris Indication
2
appears.
3
Rotate the [PUSH] Dial to adjust the iris.
Adjustable Range of the Iris
CLOSE (Closed), F16, ..., F1.7,
OPEN (Opened) 0dB, 3dB, ..., 18dB
When a value closer to [CLOSE] is selected, the image becomes darker.
When a value closer to [OPEN] is selected, the image becomes brighter.
The value to which dB is attached indicates a gain value. If this value is too
large, the quality of the image deteriorates.
To Resume Automatic Adjustment
Set the Mode Selector Switch to [AUTO].
≥For other notes, see page 61.
~~~~~~~~~~~~~~~~~~~~~~~~~
Recording with a Fixed Brightness
(AE Lock Function)
This is a function for setting a fixed brightness. When recording in light with
an extreme difference in the brightness of the background and the subject,
such as a person standing in front of a dark background, the person can be
recorded brightly if the brightness is adjusted to the person.
1
After setting to Camera Mode, press the [W/T] zoom Lever
toward [T] and zoom in to the part you want to record.
2
Set the Mode Selector Switch to [AE LOCK].
≥The [ ] Indication
1
flashes to indicate that the brightness is
fixed. Afterwards, it lights up white.
To fix your desired brightness
Set the Mode Selector Switch to [MANUAL] first and adjust the Shutter Speed
and Iris to the desired color in step 2, and then set the Mode Selector Switch
to [AE LOCK].
To cancel AE Lock Function
Set the Mode Selector Switch to [AUTO] or [MANUAL].
≥Set the AE Lock again when [TAPE/CARD] Selector is switched after the
AE Lock has been set. (The brightness setting may be changed.)
AE LOCK
MNL
1/60
F3.4
0dB
2, 3
1