Panasonic PV-DV952 Camcorder User Manual


 
39
Playing Back Files from the Memory Card
It allows you to play back files recorded on a Card.
When you set the Palmcorder to Card Playback Mode, the Card Contents
1
are displayed to inform you which kind(s) of data (still picture, moving
picture and/or voice data) are recorded on the Card.
ªPlaying back Still Pictures
1
Set the Palmcorder to Card Playback Mode.
The [CARD P.B.] Lamp lights up.
The still picture that was recorded last on the Card is displayed.
2
Set the [STILL/MPEG4/VOICE] Selector to [STILL].
3
Start Playback.
1: Starts Slide Show (The [SLIDE!] Indication is displayed)
5: Playing back the next Picture
6: Playing back the previous Picture
: Stop the slide playback
;: Pause slide playback
ªPlaying back Moving Pictures (MPEG4)
1
11
1
Set the Palmcorder to Card Playback Mode.
The [CARD P.B.] Lamp lights up.
2
22
2
Set the [STILL/MPEG4/VOICE] Selector to [MPEG4].
3
33
3
Start Playback.
1: Playing back
: Stop the playing back
;: Pause playing back (This button does not pause playing back within
2 seconds of finishing playing back.)
5: (Stop Mode) To the beginning of the next file.
(Playback Mode) To the beginning of the next file picture and start playback.
(Pause Mode) To the beginning of the next file and turns to Stop Mode.
6: (Stop Mode) To the beginning of the previous playback file.
(Playback Mode) To the beginning of the playback file and start
playback.
(Pause Mode) To the beginning of the file under playback and turns to
Stop Mode.
File is numbered in hexadecimal form.
When the object is moving fast or zoom operation is performed, picture may
appear to be still or a mosaic noise pattern appears, but this is not a
malfunction.
ªPlaying back Voice
1
Set the Palmcorder to Card Playback Mode.
The [CARD P.B.] Lamp lights up.
2
Set the [STILL/MPEG4/VOICE] Selector to [VOICE].
3
Start Playback.
1: Playing back
: Stop the playing back
;: Pause playing back (This button does not pause playing back within
2 seconds of finishing playing back).
5: (Stop Mode) To the beginning of the next File.
(Playback Mode) To the beginning of the next File and start playback.
(Pause Mode) To the beginning of the next File and turns to Stop Mode.
6: (Stop Mode) To the beginning of the previous playback File.
(Playback Mode) To the beginning of the playback File and start
playback.
(Pause Mode) To the beginning of playback File and turns to Stop Mode.
If the Operation Lever is pushed towards [6] or [5] for 1 or more
seconds, it becomes 10k playback and if pushed for 7 or more seconds, it
becomes 60k playback. Releasing the Operation Lever brings back to
normal playback.
2
Folder-File Number (When the PICTURE or MPEG4 is played back only)
3
Picture Size (When the PICTURE is played back)
Playback time (When MPEG4 data or VOICE data is played back)
4
File Number
To adjust the volume (Only Playing back MPEG4 and Voice)
During playback, hold down the [PUSH] Dial until the volume indication
appears and rotate it to adjust the volume. (l 30)
1
3
4
MPEG4
3
4
2
VOICE
CAMERA
VCR
CARD P.B.
MODE
ON
OFF
POWER
STILL
VOICE
MPEG4
CARD MODE
2, ,
2
1, ,
1
CARD CONTENTS
PICTURE
MPEG4
VOICE
SE
3, ,
3
2
3
4
100-0012