Filter
Top Products
40
1
3
5
4
PICTURE
No.25 100-0012
2
640
640
640
640
640
640
1
3, 4,
MENU
STILL
VOICE
MPEG4
CARD MODE
2, 4
MULTI/P-IN-P
PUSH
SHUTTER/IRIS/VOL/JOG
No
.
3
FILE SEARCH
PUSH MENU TO RETURN
ªTo Select a Desired File and Play it Back
After setting the Palmcorder to the Card Playback Mode (l 39).....
1
Slide the [STILL/MPEG4/VOICE] Selector to desired type of
data.
2
Press the [MULTI] Button.
≥The files recorded on the Memory Card are displayed in Multi-Picture
Mode.
1
3
Rotate the [PUSH] Dial and select a desired file.
≥The selected file is marked with a red frame.
≥When 7 or more files have been recorded, rotate the [PUSH] Dial to
display the next file. The Operation Lever (towards [6] or [5])can
be used instead of the [PUSH] Dial.
4
Press either the [PUSH] Dial or the [MULTI] Button.
≥The selected file is shown on the entire screen.
2
File Size (When [STILL] is selected at Step 1)
3
File Number
4
Folder-File Number (When [STILL] or [MPEG4] is selected at Step 1)
ªUsing File Search Mode
1
11
1
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[FILE SEARCH] >> [YES].
≥The file search screen
5
appears.
2
22
2
Rotate the [PUSH] Dial to select the desired number of the
file and then press it.
≥The selected number’s file appears.
≥The same process can be performed using the short-cut menu (l 18).
≥For other notes, see page 64.
~~~~~~~~~~~~~~~~~~~~~~~~
Copying pictures on a Memory Card to a
Cassette
After setting the Palmcorder to the Card Playback Mode (l 39).....
To Copy One Picture
1
Slide the [TAPE/CARD] Selector to [TAPE].
2
Slide the [STILL/MPEG4/VOICE] Selector to [STILL].
3
Display a desired picture.
≥Please refer to “To select a Desired File and Play it Back”.
4
Press the [PHOTO SHOT] Button.
≥It takes approximately 7 seconds to copy a still picture to the Cassette.
≥During the copying, the Indication
1
appears.
To Copy All the Pictures
1
11
1
Display the first picture.
≥If a picture other than the first one is displayed, only the subsequent
pictures will be copied.
2
22
2
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[RECORD TO TAPE] >> [YES].
≥It takes approximately 7–11 seconds for each picture to be copied to
the cassette. To stop the copying midway, press the [∫] Button.
≥During the copying, the Indication
1
appears.
≥When recording to tape, select the tape position before recording. The
picture will be recorded to the tape position when the [PHOTO SHOT]
button is pressed at step 4.
≥When pictures with a size other than [640k480] are copied to the cassette,
their pictures quality will deteriorate slightly.
≥Picture size recorded on tape is [640k480]. (Cannot save as mega-pixel
still picture)
≥Moving Picture (MPEG4) and Voice data cannot be recorded from a card to
tape.
≥When recording the Card Images on a Tape, a PhotoShot index signal is
automatically recorded with a picture.
≥Even if you edit the Slide Show, it is not applied to the order in copying the
pictures.
≥For other notes, see page 63.
1
NOW RECORDING
REC
2
1
TAPE
CARD
4
PHOTO
SHOT
STILL
VOICE
MPEG4
CARD MODE
3
MENU
PUSH
SHUTTER/IRIS/VOL/JOG