Panasonic PV-DV952 Camcorder User Manual


 
41
Slide Show
The recorded still pictures in the Card can be played back like a Slide Show.
You can set up a Slide Show or change the content.
To Select Pictures to Play Back in Your Slide Show
1
After setting the [STILL/MPEG4/VOICE] Switch to [STILL],
set [CARD FUNCTIONS] >> [CARD EDITING] >>
[SLIDE SHOW] >> [YES].
Slide Show editing screen appears.
2
Set [EDIT] >> [YES].
3
Rotate the [PUSH] Dial to select a picture and then press the
dial.
4
Rotate the [PUSH] Dial to select playback order and then
press the dial.
This step is skipped when there are no pictures set for the Slide Show.
5
Rotate the [PUSH] Dial to adjust the playback time and then
press the dial.
The Playback Order Indication
1
and the Playback Time (Second)
Indication
2
appear.
The [¥] Indication
3
is displayed below pictures that have been
selected for the Slide Show.
To select the next picture, repeat the Steps 3 to 5 above.
6
Press the [MENU] Button to end the setup.
7
After setting [SLIDE SHOW] >> [PRESET], press the [MENU]
Button.
8
Push the Operation Lever towards [1].
The [M.SLIDE!] Indication is displayed.
4
To Play Back All the Pictures Continuously
After setting the [SLIDE SHOW] to [ALL], push the Operation Lever towards
[1].
The [SLIDE!] Indication is displayed.
5
All pictures are played back for approximately 5 seconds each, from the first
to the last recorded picture, and playback then stops.
To Pause the Slide Show
Push the Operation Lever towards [;].
The [(M.) SLIDE;] Indication is displayed.
6
To Stop the Slide Show
Push the Operation Lever towards [].
To Verify the Selected Pictures
Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES]
>> [VERIFY] >> [YES].
Only the selected pictures are displayed in Multi-Picture Mode in the
Playback order.
To Delete the Selected Pictures
1
11
1
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[SLIDE SHOW] >> [YES].
2
22
2
Set [DELETE] >> [YES].
3
33
3
Select the picture you want to delete and press the [PUSH]
Dial.
To Reset the Slide Show Setup
Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES]
>> [RESET] >> [YES] >> [YES].
Slide Show settings are reset.
For other notes, see page 64.
EDIT
PUSH MENU TO RETURN
No.5
9SEC
2
1
3
M.SLIDE
4
1, 2, 3, 4, 5, 7
, ,
1, 6, 7,
SLIDE
5
SLIDE
6
640
640
1200
640
640
1200
MENU
PUSH
SHUTTER/IRIS/VOL/JOG
S
E
8