Filter
Top Products
Playback mode
39
LSQT0860
Playback on TV
Images recorded by this Camcorder can be
played back on a TV.
≥Insert a recorded tape into this Camcorder.
1 Connect the Camcorder to a TV.
≥Connect the Camcorder and the TV by using
the AV cable 1.
≥If the TV has an S-Video terminal, then also
connect an S-Video cable 2 (optional). An
S-video connection allows you to enjoy a
higher quality image.
2 Turn on this Camcorder and set the mode
dial to the Tape Playback Mode.
3 Select the input channel on the TV.
4 Move the joystick up to select the [1/;]
icon to start playback.
≥The image and audio are output on the TV.
5 Move the joystick down to select the [∫]
icon to stop playback.
≥Whenever plugging in the S-Video cable, plug in
the AV cable, too.
≥Use the AC adaptor to avoid battery depletion.
ª
If the image or audio from this
Camcorder is not output on the TV
≥Check that the plugs are inserted as far as they
go.
≥Check the connected terminal.
≥If the image does not appear on the TV even if
[BASIC] >> [AV JACK] >> [OUT/Ë] are set,
then set to [OUT]. (
-51-)
≥Check the TV’s input setting (input switch).
(For more information, please read the
operating instructions for the TV.)
ª
To display the on-screen information
on the TV