Filter
Top Products
Others
55
LSQT0860
CAN NOT USE USB:
You are connecting the USB cable with the
DV cable connected.
CHANGE TO MANUAL MODE:
You are attempting to select the item on the
[SCENE MODE] when the [AUTO/
MANUAL/FOCUS] switch is set to [AUTO].
REVERSE THE LCD MONITOR:
At the time of 0 Lux MagicPix mode, when
LCD monitor is not reversed, it displays.
When the LCD monitor is rotated by 180°
towards the lens, the brightness of the LCD
monitor cannot be adjusted.
Functions cannot be used
simultaneously
Some functions in the Camcorder are disabled or
cannot be selected due to its specifications. The
table below shows examples of functions
restricted by conditions.
Functions Conditions which disable
the functions
≥Progressive ≥When recording onto a
tape and a card
simultaneously
≥When digital zoom
(10k or higher) is used
≥When the shutter speed is
1/750 or faster in Tape
Recording Mode
≥When the gain value is
increased in Tape
Recording Mode
≥When the MagicPix
function is used
≥When the portrait mode of
the scene mode is used in
Tape Recording Mode
≥Digital zoom
≥Fade
≥When the Card Recording
mode is used
≥Image stabilizer ≥When the Card Recording
mode is used
≥When the MagicPix
function is used
≥Backlight
compensation
≥When the iris/gain is set
≥When the MagicPix
function is used
≥Soft skin
≥Tele-macro
≥Recording
check
≥While recording to a tape
≥MagicPix ≥While recording to a tape
≥When the Card Recording
mode is used
≥RapidFire
Consecutive
Photoshot
≥When [PICTURE SIZE] is
set to other than [640]
≥Zoom
microphone
≥Wind noise
reduction
≥An external microphone is
used
LSQT0860ENG.book 55 ページ ２００４年１２月２２日 水曜日 午後２時３８分