Filter
Top Products
Others
- 192 -
> Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
• When the mode dial is set to [¨], contents of the built-in memory will be displayed.
> Set the mode dial to anything except [¨].
> Check if your PC is compatible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
> A message prompting to format the card may be displayed when connecting, but do not
format.
> If the [ACCESS] displayed on the LCD monitor does not disappear, disconnect the
USB
connection cable
after turning off the power.
• Pictures cannot be printed using a printer which does not support PictBridge.
> Set to [PictBridge(PTP)] in [USB MODE]. (P39, 166)
> When using a printer with a Cropping or borderless printing function, cancel this function
before printing. (For details, refer to the Operating Instructions for the printer.)
> When you order photo studios to print pictures, ask the photo studio if the pictures can be
printed with both ends.
> Press [MENU/SET], select the [SETUP] menu icon [ ] and then select the [~] icon to set
the desired language. (P41)
• AF assist lamp (P121) will turn on white in the dark place to assist the focusing.
• Is [AF ASSIST LAMP] on the [REC] mode menu set to [ON]? (P121)
• The AF assist lamp does not turn on in bright places.
• The surface of the camera may become warm during use. This does not affect the performance
or quality of the camera.
The card is not recognized by the PC. (The built-in memory is recognized.)
The card is not recognized by the PC. (SDXC memory card is used)
The picture cannot be printed when the camera is connected to a printer.
The ends of the pictures are cut at printing.
Others
An unreadable language was selected by mistake.
White lamp may come on when the shutter button is pressed halfway.
The AF assist lamp does not turn on.
The camera becomes warm.