Filter
Top Products
- 87 -
Advanced (Recording pictures)
This Mode is optimal for taking pictures underwater deeper than 3 m (10 feet). Use the
marine case (DMW-MCFT2; optional) when taking pictures underwater deeper than 10 m
(33 feet).
¢ This camera has a waterproof/dustproof function equivalent to "IP68". It is possible to take
pictures in 10 m (33 feet) depth for 60 minutes.
Fixing the focus underwater (AF Lock)
You can fix the focus before taking a picture with AF Lock. This is useful if you want to take
pictures of a fast moving subject etc.
1 Aim the AF area at the subject.
2 Press 2 to fix the focus.
•
The AF Lock icon A appears when the subject is focused.
• Press 2 again to cancel AF Lock.
• When you press the zoom lever, the AF Lock is canceled. In this
case, focus on the subject and fix the focus again.
• You cannot set to AF Lock when [AF MODE] is set to [ ].
White Balance fine adjustment
You can adjust the hue to match the water depth and the weather.
1 Press 3 [È] three times to display [WB ADJUST.].
2 Press 2/1 to adjust the White Balance.
•
Select [0] if you do not want to finely adjust the White Balance.
3 Press [MENU/SET] to close the menu.
•
If you adjust the White Balance, [ ] appears on the screen in red or blue.
Note
•
To prevent water leakage, make sure that there are no foreign objects, such as sand, hair, dust,
etc., in the card/battery area and close the card/battery door and terminal cover all the way until
it clicks. Also, read
“(Important) About the Waterproof/Dustproof and Anti-shock Performance
of the Camera
” (P7) before using the camera.
• Dip the camera in fresh water in a shallow container for 10 minutes or less after using it, then
wipe the water off with a dry soft cloth. (P12)
• The focus range is 5 cm (0.17 feet) (Wide)/30 cm (0.99 feet) (Tele) to ¶.
• LED light is fixed to [ ].
• [AF ASSIST LAMP] is fixed to [OFF].
[UNDERWATER]
2 [RED]: Press when the hue is bluish.
1 [BLUE]: Press when the hue is reddish.
A
AWB