Filter
Top Products
-23-
■ Network Setup of the PC
To set up the network of the PC, first change the TCP/IP
settings of the PC to match them to the default settings
of the camera.
The following are the default network settings of the
camera.
IP address : 192.168.0.10
Subnet mask : 255.255.255.0
Default gateway : 192.168.0.1
To access the camera, the IP address of the PC should
be “192.168.0.XXX” (where XXX should be a number
from 2 to 254 except 10).
Note: The following procedure is described based on
the assumption that the Windows XP is running on
the PC. When running an OS other than Windows
XP, see the manual included with the OS.
1. Start up your PC.
2. Click the “Start” button and select “Control Panel”.
3. Double-click the “Network and Internet
Connections” icon.
4. Double-click the “Network Connections” icon.
5. Click “Local Area Communication”, and then click
“Change settings of this connection” in the
“Network Task” menu.