Panasonic WV-SF340 Series Security Camera User Manual


 
IMPORTANT
When the wide dynamic range function is activated, noise may be increased in the dark area of the
object.
The setting is available only when “Outdoor scene”, “Indoor scene (50 Hz)” or “Indoor scene (60 Hz)”
is selected for “Light control mode”.
[Face SD]
With the “Face SD” setting, if a person's face is dark and difficult to see, by combining the face detection and
wide dynamic range functions, the area with the face in the image can be corrected to become brighter and
easier to see.
Select “On” or “Off” to determine whether or not to interact with the face detection function.
On: The interactive control with face detection will work. The dynamic range is controlled in accordance
with the illuminance level around the face.
Off: The interactive control with face detection will not work.
Default: Off
Note
When “Off” is selected for “Wide dynamic range (WDR)”, the interactive control with face detection is
deactivated.
There may be some cases that the effect is not distinct when the faces are too dark to recognize due
to strong backlight.
[Adaptive black stretch]
Select “On” or “Off” to determine whether or not to activate the darkness compensation function. The darkness
compensation function can make darker parts of images brighter by digital image processing.
When “On” is selected for “Wide dynamic range (WDR)”, this setting is unavailable.
On: Activates the darkness compensation function.
Off: Deactivates the darkness compensation function.
Default: Off
IMPORTANT
When “On” is selected for “Adaptive black stretch”, noise in the darker parts may be increased, and
parts around borders between the darker parts and the brighter parts may become darker/brighter than
the other darker/brighter parts.
[Back light compensation (BLC)]
Select “On” or “Off” to determine whether or not to activate the back light compensation (BLC) function. When
“On” is selected for “Wide dynamic range (WDR)”, this setting is unavailable.
The back light compensation function can compensate back light by setting mask areas on brighter parts of
images.
On: Mask areas will be set automatically.
Off: Mask areas will not be set automatically. It is necessary to set them manually.
Default: Off
[Mask area]
When “Off” is selected for “Wide dynamic range (WDR)” and “Back light compensation (BLC)”, it is possible to
compensate for backlight by masking brighter areas.
Refer to page 117 for information on how to set the mask area.
[Light control mode]
Select the light control mode from the following.
102 Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]