Panasonic WV-SF340 Series Security Camera User Manual


 
IPv4 network
[Network Settings]
Select the method of how to configure the IP address from the following.
Static: The IP address is configured by entering manually on “IP address(IPv4)”.
DHCP: The IP address is configured using the DHCP function.
Auto(AutoIP): The IP address is configured using the DHCP function. When the DHCP server is not found,
the IP address is automatically configured.
Configure the DHCP server not to assign the same IP addresses used for the other network cameras and PCs
whose IP address is unique. Refer to the network administrator for further information about the settings of the
server.
Default: Static
164 Operating Instructions
17 Configuring the network settings [Network]