Panasonic WV-SP102E Security Camera User Manual


  Open as PDF
of 64
 
32
32
33
Configure the settings relating to the alarm image [Alarm]
Click the [Alarm] tab on the "Alarm" page. (☞Pages13and14:Howtodisplay/operatethesetupmenu)
The settings relating to the alarm image to be transmitted to an FTP server can be configured in this section. The
alarm image will be transmitted to an FTP server. To transmit alarm images to an FTP server, it is necessary to con-
figure the settings in advance. ☞ Page 42)
Important:
•Dependingonthenetworklinespeedorthenetworktraffic,imagesmaynotbetransmittedattheexactdesig-
nated interval or period.
■ Alarm image
[FTP >>]
When "FTP >>" is clicked, the [FTP] tab of the "Server"
page will be displayed. (☞ Page 42)
[Alarm image FTP transmission]
Select"On"or"Off"todeterminewhetherornotto
transmit the alarm image to the FTP server.
Default:Off
[Directory name]
Enter the directory name where the alarm images are to
be saved.
For example, enter "/ALARM" to designate the direc-
tory "ALARM" under the root directory of the FTP
server.
Available number of characters: 1 - 256 characters
[File name]
Enter the file name used for the alarm image to be
transmitted to an FTP server. The file name will be as
follows.
File name:["Enteredfilename"+"Timeanddate(year/
month/day/hour/minute/second)"]+"Serialnum-
ber"
Available number of characters: 1 - 32 characters
[Post alarm]
•Transmissioninterval
Select the transmission interval for the alarm image
transmission to the FTP server from the following.
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps
Default: 1fps
•Numberofimages
Select the number of images to be transmitted from
the following.
1pic/ 2pics/ 3pics/ 4pics/ 5pics/ 6pics/ 7pics/ 8pics/
9pics/ 10pics/ 20pics/ 30pics/ 50pics/ 100pics/
200pics/ 300pics/ 500pics/ 1000pics/ 2000pics/
3000pics
Default: 100pics
•Recordingduration
Approximate time to be taken to save the set
"Number of images" with the set "Transmission
interval" will be displayed.
[Image capture size]
Select the capture size of images to be transmitted to
the FTP server or of an image to be attached to the
alarm mail.
When"4:3"isselectedfor"Aspectratio"
QVGA/ VGA/ 1280x960*
1
When"16:9"isselectedfor"Aspectratio"
320×180/ 640×360/ 1280×720*
1
Default: VGA
*1
SP105
[Image compression rate upon alarm detection]
Select"On"or"Off"todeterminewhetherornotto
change the image quality upon alarm detection.
On: Images will be transmitted with the image quality
selected for "Image quality upon alarm detection".
 previous next