Filter
Top Products
IPv4 network
[Network Settings]
Select the method of how to configure the IP address from the following.
• Static: The IP address is configured by entering manually on “IP address(IPv4)”.
• DHCP: The IP address is configured using the DHCP function.
• Auto(AutoIP): The IP address is configured using the DHCP function. When the DHCP server is not found,
the IP address is automatically configured.
• Auto(Advanced)
SW175
SW175
SW174W
SW174W
SW172
SW172
ST165
ST165
ST162
ST162
: The IP address and other network
addresses are obtained using the DHCP function. Available IP addresses are determined by searching for
IP addresses. When the DHCP server is not found, the IP address is set to 192.168.0.10, or the already
determined IP addresses are used the same way as static IP addresses.
Operating Instructions 167
17 Configuring the network settings [Network]