Filter
Top Products
– Alarm input: Will be overwritten.
– Manual, Schedule: Can be determined by selecting “On” or “Off” for “Overwrite”.
JPEG recording
This setting is available only when “JPEG” is selected for “Recording format” of the SD memory card.
[File name]
Enter the file name used for the image to be saved on the SD memory card. The file name will be as follows.
• File name: [“Entered file name” + “Time and date (year/ month/ day/ hour/ minute/ second)”] + “Serial
number”
• Available number of characters: 1 - 8 characters
• Unavailable characters: " & * / : ; < > ? \ |
Note
• When “H.264” is selected for “Recording format”, the name of the saved file will be given automatically.
• When “FTP error” is selected for “Save trigger”, the file name entered for “File name” on the [FTP img.
trans.] tab of the “Network” page will be used for the file name of the image saved on the SD memory
card.
[Image saving interval/Number of images to be saved - Image saving interval]
When “Alarm input” or “Manual” is selected for “Save trigger”, select an interval (frame rate) of saving images
on the SD memory card from the following.
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps
• Default: 1fps
[Image saving interval/Number of images to be saved - Number of images to be saved]
Select a number of alarm images to be saved on the SD memory card from the following.
10pics/ 20pics/ 30pics/ 50pics/ 100pics/ 200pics/ 300pics/ 500pics/ 1000pics/ 2000pics/ 3000pics
• Default: 100pics
Note
• When “H.264” is selected for “Recording format”, Pre alarm and Post alarm can be set on “H.264
recording” of [Alarm] tab.
• “Number of images to be saved” can be configured only when “Alarm input” is selected for “Save
trigger”.
[Image capture size]
When “Manual” is selected for “Save trigger” and “JPEG” is selected for “Recording format”, select the image
capture size of the images to be saved on the SD memory card from the following.
When “4:3” is selected for “Aspect ratio”
SC384
SC384
SW175
SW175
ST165
ST165
:
QVGA/ VGA/ 1280x960
SW172
SW172
ST162
ST162
:
QVGA/ VGA/ 800x600
When “4:3 (VGA)” is selected for “Aspect ratio”
SW396
SW396
SW395
SW395
SC386
SC386
SC385
SC385
QVGA/ VGA/ 1280x960
When “4:3 (800x600)” is selected for “Aspect ratio”
SW396
SW396
SW395
SW395
SC386
SC386
SC385
SC385
QVGA/ 800x600/ 1280x960
When “16:9” is selected for “Aspect ratio”
SW396
SW396
SW395
SW395
SC386
SC386
SC385
SC385
SC384
SC384
SW175
SW175
ST165
ST165
:
320x180/ 640x360/ 1280x720
SW172
SW172
ST162
ST162
:
Operating Instructions 61
10 Configure the basic settings of the camera [Basic]