Filter
Top Products
Step 7
First, insert the tab on the bottom of the main sunshield
rear cover into the main body, and then push the tab on
the top of the main sunshield rear cover into the main
body until a click is heard.
Step 8
Turn on the power of the camera, and select "Use" for
"SD memory card" on the [SD memory card] tab of the
"Basic" page on the setup menu. (☞ Operating
Instructions (included in the CD-ROM))
Step 9
Format the SDHC/SD memory card by clicking the
[Execute] button of "Format" on the [SD memory card] tab
of the "Basic" page on the setup menu. (☞ Operating
Instructions (included in the CD-ROM))
Main sunshield
rear cover
Step 5
Align "g" of the water-resistant cap to "OPEN h" of the
camera. Then, turn the water-resistant cap toward "h
LOCK" until the Water-resistant cap is secured to the
camera.
Step 6
Secure the water-resistant cap with the locking screw.
(Recommended tightening torque: 0.69 N·m {0.51 lbf·ft})
How to remove the SDHC/SD memory card
Important:
• BeforeremovingtheSDHC/SDmemorycard,select"Notuse"for"SDmemorycard"onthe[SDmemorycard]tabof
"Basic" on the setup menu first. (☞ Operating Instructions (included in the CD-ROM))
Step 1
Remove the water-resistant cap by following steps 1 - 3
of the "How to insert an SDHC/SD memory card" section
(☞ page 15).
Step 2
Push the SDHC/SD memory card to release the lock. The
SDHC/SD memory card will come up from the slot.
Water-resistant cap
Locking screw
Step 3
Return the parts to the original state by following steps 5 -
7 of the "How to insert an SDHC/SD memory card" sec-
tion.
16