Panasonic WV-SW598 Security Camera User Manual


 
v Iftheinstallationscreenoftheviewersoftware“NetworkCameraView4S”isdisplayed,followtheinstructionsofthe
wizard to start the installation. (The viewer software is installed from the camera.)
• The“Live”pagewillbedisplayed.
• Ifyoucannotinstalltheviewersoftware“NetworkCameraView4S”orifimagesarenotdisplayed,clickthe
[Install]buttonnextto[ViewerSoftware]onthelauncherwindowtoinstallthesoftware.
• Performthe[Time&date]settingsinthe“Setup”-“Basic”pagebeforeusingthecamera.
Note:
• When no image is displayed on the “Live” page, refer to the Troubleshooting in the Operating Instructions on the
provided CD-ROM.
•ItispossibletoenhancethenetworksecuritybyencryptingtheaccesstocamerasusingtheHTTPSfunction.
Refer to the Operating instructions on the provided CD-ROM for how to configure the HTTPS settings.
•Clickthe[Setup]buttononthe“Live”page,theuserauthenticationwindowwillbedisplayed.Enterthedefault
user name and password as follows, and log in.
User name: admin
Password: 12345
•Whenchangingsettingsrelatedtothenetworksettings,suchasconnectionmode,IPaddress,andsubnetmask,
click the [Network Settings] button in [Panasonic IP Setting] screen as shown in step 3, then change each setting.
•Duetosecurityenhancementsin“IPSettingSoftware”,“Networksettings”ofthecameratobeconfiguredcannot
be changed when around 20 minutes have passed after turning on the power of the camera. (When the effective
period is set to “20 min” in the “Easy IP Setup accommodate period”.)
However, settings can be changed after 20 minutes for cameras in the initial set mode.
•“NetworkCameraRecorderwithViewerSoftwareLite”whichsupportslivemonitoringandrecordingimagesfrom
multiple cameras is available. For further information, refer to our website
(http://security.panasonic.com/pss/security/support/info.html).
32