Filter
Top Products
10 November 2003 8000-A2-GB30-10
hdsl2ShdslprotocolInitFailure This notification indicates that the bit
setting forprotocolInitFailure in the
hdsl2ShdslEndpointCurrStatus object for
this endpoint has changed.
hdsl2ShdslEndpointCurrStatus
devLastTrapString
hdsl2ShdslnoNeighborPresent This notification indicates that the bit
setting for noNeighborPresent in the
hdsl2ShdslEndpointCurrStatus object for
this endpoint has changed.
hdsl2ShdslEndpointCurrStatus
devLastTrapString
hdsl2ShdslLocalPowerLoss This notification indicates timpending
unit failure due to loss of local power (last
gasp).
hdsl2ShdslInvVendorID
devLastTrapString
SONET LINEAR APS MIB Traps:
apsEventSwitchover This notification is sent when the value of
an instance of apsChanStatusSwitchovers
increments
apsChanStatusSwitchovers,
apsChanStatusCurrent
devLastTrapString
apsEventModeMismatch This notification is sent when the value of
an instance of apsStatusModeMismatches
increments
apsStatusModeMismatches,
apsStatusCurrent
devLastTrapString
apsEventChannelMismatch This notification is sent when the value of
an instance of
apsStatusChannelMismatches increments
apsStatusChannelMismatches,
apsStatusCurrent
devLastTrapString
apsEventPSBF This notification is sent when the value of
an instance of apsStatusPSBFs increments
apsStatusPSBFs,
apsStatusCurrent
devLastTrapString
apsEventFEPLF This notification is sent when the value of
an instance of apsStatusFEPLFs
increments
apsStatusFEPLFs,
apsStatusCurrent
devLastTrapString
Enterprise Specific Traps:
mpeSelfTestFailure A hardware failure of the unit was
detected as part of the unit’s selftest. This
trap will be generated after the unit has
completed initialization
entPhysicalIndex
mpedevSelfTestResults
devLastTrapString
mpeCcn This trap is generated to indicate a change
in the configuration in the entity unit
specified by the entPhysicalIndex value.
entPhysicalIndex
devLastTrapString
Table 1-4. Summary of Traps (4 of 7)
Trap Description VarBind(s)