Filter
Top Products
8000-A2-GB30-10 November 2003 57
7.1.2.1.1 entPhysicalIndex
The index for this entry.
Valid Object Value(s):
The value of this object is based on the ifIndex in the Interfaces Group. Refer to Evolution
of the Interfaces Group of MIB-II (RFC 2863) on page 1-18 for further details of these
indexes. The following are the values for the entPhysicalIndex object based on that scheme.
7.1.2.1.2 entPhysicalDescr
A textual description of physical entity. This object should contain a string which identifies
the manufacturer’s name for the physical entity, and should be set to a distint value for each
version or model of the physical entity.
entPhysicalModelName {entPhysicalEntry 13} SnmpAdminString read-only current Yes
entPhysicalAlias {entPhysicalEntry 14} SnmpAdminString read-write current Yes
entPhysicalAssetID {entPhysicalEntry 15} SnmpAdminString read-write current Yes
entPhysicalIsFRU {entPhysicalEntry 16} Truth Value read-only current Yes
Table 1-60. entPhysicalEntry {entPhysicalTable 1} (2 of 2)
Object OID Syntax Access Status
Sup-
ported
Table 1-61. entPhysicalIndex
Entity RRCCSS LPPPComments
Chassis 0001000000Chassis
Container 0001YY0000Slot ’yy’, yy=[1..20]
Module 0001YY0001Module (SCPs and ATM portcards)
in slot ’yy’, yy=[1..20]
Splitter card 0001YY0003Splitter in slot ’yy’, yy=[1..20]
DSL Port 0001YY10ZZDsl user ports, yy=[1..20], zz=[1..48]
t1e1 port 000100190ZT1/E1 ports, z=[1..8]
OC3 port 000100190ZOC3 ports, z=[1..2]
Console port 0001001801Console port
Ethernet Mgmt port 0001001802Ethernet port
Temp Sensor 000100010ZTemperature Sensor in chassis ‘z’,
z=[1..3]
Fan 000100011ZFan ‘z’in Chassis, z=[1]
Management Plane PLD0001YY0121Management Plane PLD in slot yy,
yy=[1..20]
Power Supply 000100013ZPower Supply ‘z’in Chassis, z=[1..2]