Filter
Top Products
8000-A2-GB30-10 November 2003 83
7.8.4.1 pdnRedunCommand.
This MIB object allows managers to command an action to an entity module (given by the
entPhysicalIndex), configured for redundancy. The supported commands are switch(2) and
forceswitch (3). The value noCmd (1) will be returned when no previous command had
been issued. Users should specify the slot-based entPhysicalIndex (for example, 1190001)
corresponding to the entity that will take the action.
7.8.4.2 pdnRedunAlarmStatus.
This MIB object displays the status of any outstanding major alarms in an entity of a
redundant configuration. If no major alarms are present, this object will return 0. This MIB
object is a Bitmap to report multiple major alarm conditions. This MIB object is indexed by
the slot-based entPhysicalIndex (for example, 1190001).
7.8.4.3 pdnRedunEntityState.
This MIB object displays the state of each entity module configured for redundancy. The
possible states reported are: activeState (1), activeAlarmState (2), standbyState (3),
standbyAlarmState (4). This MIB object is indexed by the slot-based entPhysicalIndex (for
example, 1190001).
7.8.4.4 pdnRedunNotificationEnable.
This MIB object provides the ability to enable and disable the generation of traps related to
redundancy in the specified entity. The default value of this object is disable. This MIB
object is indexed by the slot-based entPhysicalIndex (for example, 1190001).