Installing the PMC Ethernet Access Module onto the 6081RC front blade 22
Model 6081RC Network Access Server User Manual 2 • Hardware installation
Installing the PMC Ethernet Access Module onto the
6081RC front blade
You may purchase an optional PMC Ethernet Access Module for the Model 6081RC. The PMC Ethernet
Access Module may be factory installed, or you may order it separately for installation in the field. The Model
6081RC has two PMC expansion slots, numbered 1 and 2 (see figure 5). The PMC Ethernet Access Module
must only be installed in PMC slot 2, do not install it in PMC slot 1.
Figure 5. Installing the PMC card
6081RC
Use M2.5 x 6 mm long screw to
mount PPMC card to 6081RC
Remove PMC cover
from front panel
PMC card
PMC slot 1
Do not install the
PMC in this slot
PMC slot 2