Filter
Top Products
Ethernet 43
Model 6081RC Network Access Server User Manual C • Cabling
Ethernet
Ethernet devices (10Base-T/100Base-T/1000Base-T) are connected to the 6081RC over a cable with RJ-45
plugs. The Ethernet port on the 6081RC is Auto-MDX use any straight or crossover cable to connect to hubs,
switches, PCs or other devices.
Figure 14. Typical Ethernet straight-through cable diagram for 10/100Base-T
Figure 15. Typical Ethernet straight-through cable diagram for 1000Base-T
The interconnecting cables shall be acceptable for external use
and shall be rated for the proper application with respect to volt-
age, current, anticipated temperature, flammability, and
mechanical serviceability.
CAUTION
Hub
RJ-45, male
1
2
3
6
RJ-45, male
1
2
3
6
Straight-through cable
Note: Other pins are not used.
MODEL 6081RC Network Access Server
PWR
1 2
L2 LINK
ENET
CONFIG
10/100 ENET
READY
RJ-45, male
1
2
3
6
4
5
7
8
RJ-45, male
1
2
3
6
4
5
7
8