Pelco 9770 Security Camera User Manual


 
36 C1555M-G (12/07)
DISPLAY THE CM9770-MXB SOFTWARE VERSION LEVEL
To display the software version level on a system monitor, complete the following steps:
1. Enter the monitor number, and then press the MON key.
2. Enter 999997, and then press the CAM key. The software version number appears on the monitor.
DISPLAY A BLUE RASTER SCREEN
To display a blue raster screen on a system monitor, complete the following steps:
1. Enter the monitor number, and then press the MON key.
2. Enter 999999, and then press the CAM key. A blue raster screen appears on the monitor.
MONITOR COLOR ADJUSTMENT
Once you have connected all devices and powered the system, you can use the System 9770 color bars as a reference tool for adjusting the color
on each monitor.
1. Enter the monitor number, and then press the MON key.
2. Enter 999998, and then press the CAM key. Broadcast quality color bars appear on the monitor.
3. Adjust color on each monitor as necessary until the color bars match the following color order on the monitor (for black and white monitors
you can use the color bars to adjust brightness)
.
Figure 26. System 9770 Color Bars
NOTE: You can also set DIP switches 5 and 6 on the monitor output card to display color bars. Refer to the Monitor Output Card
(CM9770-VMC) Detail section in the Appendix.
WHITE
YELLOW
CYAN
GREEN
MAGENTA
RED
BLUE
BLACK
(LIGHT BLUE)
(LIGHT PURPLE)