Pelco 9770 Security Camera User Manual


 
C1555M-G (12/07) 63
CM9770-MXB
ELECTRICAL
Input Voltage 100-240 VAC, 50/60 Hz, autoranging
Power Consumption 60 watts maximum (fully populated)
Communication Full duplex RS-422 using an RJ-45 connector
VIDEO
Inputs Card slots support up to 256 inputs per bay
Outputs Two output card slots for supporting 32 outputs per bay
Video Input Level 0.5 to 2 Vp-p, RS-170 composite video
Impedance 75 ohms terminating (looping versions available)
Crosstalk–Adjacent
Channel -61 dB at 3.58 MHz
V-Synch External connector available on rear panel
Overall Frequency Response Flat to 8MHz
Differential Gain 0.51%
Differential Phase 0.38 degrees
Luminance Nonlinearity 0.20%
Signal to Noise Ratio -71dBrms
GENERAL
Operating Temperature 32° to 122°F (0° to 50°C), noncondensing
Dimensions
Matrix Bay 21.7 (D) x 19.0 (W) x 10.5 (H) inches (55.10 x 48.26 x 26.67 cm)
Mounting Baffle 24.00 (D) x 19.00 (W) x 1.75 (H) inches (60.96 x 48.26 x 4.45 cm)
CM9700-VPP 6.00 (D) x 19.00 (W) x 1.07 (H) inches (15.24 x 48.26 x 2.72 cm)
CM9700-VPP-RK 14.12 (D) x 19.00 (W) x 13.96 (H) inches (35.86 x 48.26 x 35.46 cm)
Mounting Fits 19-inch EIA-standard rack (6 RUs)
Unit Weight 33 lb (14.99 kg)
52 lb (23.59 kg), fully populated
(Design and product specifications subject to change without notice.)