Filter
Top Products
52 C1555M-G (12/07)
CONNECTING SATELLITE DEVICES
You can connect a CM6800E-48X8 matrix switcher or a CM9760-SAT device to the System 9770.
Refer to the CM9760-SAT Installation/Operation manual or to the CM6800E-48X8 Installation/Operation manual for instructions. The procedure
for using a satellite device with a CM9700-CC1 is the same as for a CM9760-CC1, except that the programming within CM9700-MGR is more
user-friendly. You just need to add the satellite device using the Add Device wizard. The wizard leads you through the process, which includes
selecting tie lines and unique logical numbers.
Figure 42. Sample Satellite System
PROGRAMMING SATELLITE DEVICES
To add a satellite device to a System 9770, you simply need to add the satellite device in the CM9700-MGR. The Add Device wizard helps you
configure all the settings that are needed to set up the device for satellite operation.
Detailed instructions for adding a satellite device in the CM9700-MGR are provided in the CM9700-MGR Software Guide.
Note that you cannot program camera titles for satellite cameras through the 9700 System Manager. You can program these camera titles
directly from the satellite device. When a System 9770 monitor displays a satellite camera, the title received from the satellite device is
displayed.
Figure 43. Add a Satellite Device
KBD300A
CM9770
CM9760-KBD
RS-422
DATA
LINE
VIDEO TIE
LINES
MATRIX
BAY
CPU
LOCAL SITE
CM6800E-48X8
REMOTE SITE
CM6800E-48X8
1-48 CAMERAS
CM6800E-48X8