Filter
Top Products
IR FILTER MODE
Main Menu Camera Menu Next Menu IR Filter Menu
Slow shutter mode Auto
Shutter speed Auto
Auto focus mode Auto
<IR Filter>
<Sharpness>
<White balance>
Previous
Exit
<Camera>
<Line Sync>
<Power Up>
<Aux>
<Alarms, Zone Blank>
<Other>
EXIT
Backlight comp Off
Zoom limit x72
Reset camera
<Gain/AGC>
<Auto-iris>
<Next>
Exit
IR Filter mode Auto
Auto IR Level Dusk
Exit
There are two settings for the IR filter mode:
Auto - IR filter switches in and out automatically. Do the following to setup the IR filter
for automatic operation:
CAMERA SETTING SETUP
IR Filter Auto
AGC mode Auto
Shutter Speed Auto
IMPORTANT: The AGC mode and shutter speed must be set to Auto for the IR
filter to operate automatically. If the AGC mode or shutter speed is changed to
a manual setting, the IR filter setting automatically switches to OFF.
Off - IR filter is manually operated. The following presets are used to manually
operate the IR filter:
Preset 88 (21) - Filter IN (color)
Preset 89 (22) - Filter OUT (black & white)
To change the lR filter mode:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside Camera.
3. Press the Iris Open button to enter the Camera menu.
4. Position the cursor (>) beside Next.
5. Press the Iris Open button to enter the Next menu.
6. Position the cursor (>) beside IR Filter.
7. Press the Iris Open button to enter the IR Filter menu.
8. Position the cursor (>) beside IR Filter mode.
9. Press the Iris Open button. The cursor moves to the right, beside the word Auto or Off.
10. Move the joystick up or down to toggle between Auto and Off.
11. SELECT - Press the Iris Open button on your keyboard to select your choice.
CANCEL - Press the Iris Close button if you do not want to change the setting.
If the IR filter is set to Auto, check the AGC mode and shutter speed settings.
Both must be programmed for automatic operation for the IR filter to function automati-
cally. Refer to the
Gain/AGC
and
Shutter Speed
sections for programming information.
LIMIT STOPS
Main Menu
<Camera>
<Line Sync>
<Power Up>
<Aux>
<Alarms, Zone Blank>
<Other>
EXIT
Other Menu
Auto flip On
Proportional pan On
Limit stops Off
Park time minutes 0
Scan speed deg/s 25
Pattern length 1.5 min
Exit
There are two types of limit stops:
Manual limit stops - A manual (joystick) pan operation stops when a limit stop is reached.
Scan limit stops - The dome reverses direction during random, frame, or auto
scanning when a limit stop is reached.
Limit stops are controlled by software. To set limit stops:
1. Turn on the limit stop mode.
2. Program the limit stops.
Pelco Manual C2423M (5/00) 17