Filter
Top Products
C3403M-A (3/06) 13
System Information
The system Information screen displays dome drive model, software version, and other
diagnostic information.
System settings cannot be changed using this screen. This screen is for reference only.
Use the following steps to display the System Information screen:
1. Use the joystick to position the cursor beside SYSTEM INFORMATION.
2. Press Iris Open. The SYSTEM INFORMATION window opens.
(See page 9)
Quick Programming Guide
EXIT
PELCO SPECTRA MINI
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
BACK
EXIT
DOME DRIVE MODEL MINI 114R
SOFTWARE VERSION XX.X
BIOS VERSION XX.X
FONT VERSION XX.X
COMM 4800, N, 8, 1
D ADDRESS NONE
P ADDRESS 1
CM9500 MODE OFF
32 PRESETS OFF
PROTOCOL P
<ADDITIONAL>
SYSTEM INFORMATION
BACK
EXIT
FREE MEMORY XXXXX
LAST RESET X
AZIMUTH ZERO OFFSET 0.00
o
CAMERA ACTIVE YES
FPGA VERSION X
VIDEO LEVEL HIGH
CAMERA XXXX-XXXX
LANGUAGE 1 ENGLISH X.XX
LANGUAGE 2 ESPANOL X.XX
LANGUAGE 3 PORTUGUES X.XX
LANGUAGE 4 DEUTSCH X.XX
LANGUAGE 5 FRANCAIS X.XX
LANGUAGE 6 ITALIANO X.XX
ADDITIONAL