Filter
Top Products
C3403M-A (3/06) 35
CLEAR
Use this setting to clear user-defined settings or return the dome to factory default settings.
The following are the available CLEAR settings:
ALL ZONES Clears all zones. To clear a single zone, refer to the
Zones
section.
ALL PRESETS Clears all presets. To clear a single preset, refer to the
Presets
section.
ALL PATTERNS Clears the pattern.
ALL WINDOW BLANKING Clears the blanked window area.
RESTORE FACTORY DEFAULTS Restores all camera settings to factory default settings.
(See page 9)
Quick Programming Guide
EXIT
PELCO SPECTRA MINI
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
CLEAR ALL ZONES
CLEAR ALL PRESETS
CLEAR PATTERN
CLEAR ALL WINDOW BLANKING
RESTORE FACTORY DEFAULTS
BACK
EXIT
CLEAR
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERN>
<ZONES>
<WINDOW BLANKING>
<CLEAR>
<PASSWORD>
BACK
EXIT
DOME SETTINGS