Filter
Top Products
C3403M-A (3/06) 27
LINE SYNC
Line sync refers to a programmable function that allows you to synchronize all cameras within a
matrix system.
NOTE: Spectra Mini automatically senses V-Sync input. No line sync setup is required for Pelco
control systems that provide a V-Sync signal.
For matrix systems that do not output V-Sync, there are two settings for line synchronization:
ON (default) Adjusts the phase of the line sync to synchronize input power.
LINE SYNC PHASE settings range from 0-359 degrees.
OFF The dome synchronizes to an internal clock.
(See page 9)
Quick Programming Guide
EXIT
PELCO SPECTRA MINI
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERN>
<ZONES>
<WINDOW BLANKING>
<CLEAR>
<PASSWORD>
BACK
EXIT
DOME SETTINGS
BACK
EXIT
LINE SYNC
LINE SYNC ON
LINE SYNC PHASE 0