Filter
Top Products
C3403M-A (3/06) 21
BACKLIGHT COMPENSATION (BLC)
If a bright backlight is present, the subjects in the picture may appear dark or as a silhouette.
Backlight compensation enhances objects in the center of the picture. The dome uses the center
of the picture to adjust the iris. If there is a bright light source outside of this area, it will wash
out to white. The camera will adjust the iris so that the object in the sensitive area is properly
exposed.
There are two backlight compensation settings:
ON Backlight compensation is activated.
OFF (default) Backlight compensation is not activated.
NOTE: If backlight compensation is ON, decrease the Auto Iris setting. Refer to the
Auto Iris
section.
VIDEO LEVEL
Set the video output to one of the following:
NORMAL 1.0 volt peak-to-peak
HIGH (default setting) 1.2 volt peak-to-peak to compensate for losses in video cable.
(See page 9)
Quick Programming Guide
EXIT
PELCO SPECTRA MINI
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERN>
<ZONES>
<WINDOW BLANKING>
<CLEAR>
<PASSWORD>
BACK
EXIT
DOME SETTINGS
BACK
EXIT
AUTO FOCUS ON
ZOOM LIMIT X80
ZOOM SPEED MEDIUM
PRESET FOCUSED
<ADVANCED SETTINGS>
CAMERA
BACK
EXIT
ADVANCED SETTINGS
SHUTTER SPEED AUTO
AGC LIMIT 29
AUTO IRIS AUTO
AUTO IRIS LEVEL 76
AUTO IRIS PEAK 16
AUTO SHARPNESS ON
SHARPNESS LEVEL 26
AUTO WHITE BALANCE ON
R GAIN 402
B GAIN 678
BACKLIGHT COMP OFF
VIDEO LEVEL HIGH