Pelco DX4700 Security Camera User Manual


 
44 C4655M (2/11)
4. Edit the holiday recording schedule settings for the desired channel.
Figure 37. Editing a Holiday Recording Schedule
5. Click Close.
6. Click OK.
Deleting a Holiday Schedule
1. From the Schedule submenu, click the Holiday button.
2. Click List.
3. Select a holiday recording schedule, and then click Delete.
4. Click Close.
NORMAL RECORDING
NOTE: IP cameras only record in the normal recording mode.
The unit allows you to configure the following settings:
Ch: Lists the input channels (CH 01 to CH 16) for configuration.
Resolution: Sets the resolution for the channel. The default resolution is 352 x 240.
Quality: Sets the picture quality of recorded video: LOWEST, LOW, STANDARD, HIGH, and HIGHEST.
Frame Rate: Sets the frame rate.
For information about the resolution, quality, and frame rate, refer to Appendix E: Resolutions and Frame Rates (250 GB HDD) on page 75.
To configure the normal recording mode:
1. From the Camera menu, click the Normal Record submenu.
2. Click the Ch 1 Resolution box, and enter a setting.
3. Configure the remaining settings for Ch 1.
4. Repeat the previous steps (as necessary) to configure additional channels.
5. Click Close.
6. Click OK.