Filter
Top Products
Pelco Manual C418M (8/97) 1
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
This symbol indicates that there
are important operating and
maintenance instructions in the
literature accompanying this
unit.
4. Only use replacement parts recommended by
Pelco.
5. After replacement/repair of this unit’s electri-
cal components, conduct resistance measure-
ments between line and exposed parts to verify
the exposed parts have not been connected
to line circuitry.
6. The installation method and materials should
be capable of supporting four (4) times the
weight of the enclosure, pan/tilt, camera and
lens combination.
Please thoroughly familiarize yourself with the
information in this manual prior to installation and
operation.
2.0 DESCRIPTION
The EH8000 series enclosures are sealed and
pressurized camera enclosures designed to pro-
tect CCTV camera/lens from adverse environmen-
tal conditions.
The EH8000 series enclosures are constructed of
aluminum which resists corrosion and may be
used in a wide range of chemical environments
such as acetate solvents, acetone, alcohol, ether,
freon, gasoline, hydrocarbons, hydrogen perox-
ide, oxygen, sulfur, and turpentine.
The enclosures are not recommended for use in
sodium hydroxide, potassium hydroxide, phos-
phorous pentoxide, hydroxides, ferric nitrate,
bleaching solutions or acid salts environments.
INSTALLATION/OPERATION MANUAL
MODEL EH8000 SERIES
PRESSURIZED CAMERA ENCLOSURES
1.0 SCOPE
The information contained within this manual cov-
ers the installation and operation of the EH8004,
EH8006, EH8006-26, and the EH8008 environ-
mental enclosures.
1.1 WARNINGS
Prior to installation and use of this product, the
following WARNINGS should be observed.
1. Installation and servicing should only be done
by Qualified Service Personnel and conform
to all Local Codes.
2. Unless the enclosure is specifically marked as
a NEMA Type 3-6P enclosure, it is designed
for Indoor use only and it must not be installed
where exposed to rain and moisture.
3. The product and/or manual may bears the fol-
lowing marks:
This symbol indicates the
dangerous voltage constitut-
ing a risk of electric shock is
present within this unit.
CAUTION: TO REDUCE THE RISK OF ELEC-
TRICAL SHOCK, DO NOT REMOVE
COVER. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSON-
NEL.