Pentax 10916 Digital Camera User Manual


 
152
Shooting Settings
5
2
Press the four-way controller
(5), use the four-way controller
(23) to select a setting, and
press the 4 button.
3
Use the four-way controller (23) to select [Auto Align],
and use the four-way controller (45) to select O or P.
4
Use the four-way controller (23) to select [Exposure
Bracket Value], and press the four-way controller (5).
5
Use the four-way controller (23) to set the range in which
to change the exposure, and press the 4 button.
Select from ±1 EV, ±2 EV (default setting) or ±3 EV.
6
Press the 3 button twice.
The camera is ready to take a series of pictures.
O
Uses Auto Align. Activates Shake Reduction according to the [Shake
Reduction] setting. (default setting)
P
Does not use Auto Align. Deactivates Shake Reduction.
The procedure of Step 2 can also be performed through the control panel.
When both Shake Reduction and Auto Align are activated, take note of the
following points.
Make sure to hold the camera firmly so that the composition of the picture does
not change while the three images are captured. If there is a great difference
of the composition between three images, Auto Align may not be possible.
Images captured with HDR Capture are susceptible to camera shake and
blur. Be sure to set a higher shutter speed and a higher ISO sensitivity.
When the sensitivity is set to [ISO AUTO], the sensitivity can be raised
more easily than normal.
Auto Align may not be possible when lenses that have a focal length
exceeding 100 mm are used, or when the entire subject is checkered or
has a uniform surface.
•In Z (Night Scene HDR) mode, [HDR Capture] is fixed to [Auto] and the
Auto Align function is enabled.
If [One Push File Format] is assigned to the
V
/
Y
button, pressing the button
temporarily deactivates HDR Capture and saves captured images in RAW+.
HDR CaptureHDR Capture
HDR CaptureHDR Capture
Auto AlignAuto Align
Exposure Bracket ValueExposure Bracket Value
CancelCancel
MENU
OKOK
OK