Filter
Top Products
228
Changing Additional Settings
7
You can transfer images to your computer via wireless LAN by using an
SD Memory Card with a built-in wireless LAN (Eye-Fi card).
1
Select [Eye-Fi] in the [R Set-up 2] menu, and press the
four-way controller (5).
The [Eye-Fi] screen appears.
2
Use the four-way controller (23) to select [Eye-Fi
Communication], and press the four-way controller (5).
3
Use the four-way controller (23)
to select the action, and press the
4 button.
4
Press the 3 button twice.
The screen that was displayed before selecting the menu item appears again.
Using an Eye-Fi Card
• Be sure to set up a wireless LAN access point on a computer in advance for
the Eye-Fi card connection. It cannot be set up on the camera.
• Images are not transferred in the following cases:
• when an image has already been transferred
• when the size of a movie is 2 GB or more
• when an Eye-Fi card is write protected
• when a wireless LAN access point cannot be found
• when the battery level is low (battery level is F (red))
• For RAW images and movie files, the success of transfer depends on the
specifications and settings of the Eye-Fi card in use.
AUTO
Images that have not been transferred will be transferred
automatically. Images will also be transferred when images
are taken, new images are saved, or images are overwritten.
SELECT
Transfers the unsent images on the card that are
selected in playback mode (p.229).
OFF Turns off the wireless LAN function.
Eye-FiEye-Fi
Automatically transfers
unsent images from memory card
Automatically transfers
unsent images from memory card
Eye-Fi CommunicationEye-Fi Communication
Communication InfoCommunication Info
MENUMENU
CancelCancel OKOK
OK