Filter
Top Products
Before Using Your Camera
1
27
* For indicator 26, multiple face detection frames are displayed when [Contrast
AF] is set to [Face Detection]. A main face detection frame is displayed in yellow
and other frames in white. (p.106)
• The Live View image may differ from the actual image captured if the
brightness of the subject is low or high.
• If any changes occur in the shooting light source during Live View, the image
on the monitor may flicker. You can cut down on flicker by setting the power
frequency in [Flicker Reduction] of the [R Set-up 2] menu to that used in your
region.
• If the camera position is changed rapidly during Live View, the image may not
be displayed with the appropriate brightness. Wait for the display to become
stable before shooting.
• Noise may appear on the Live View image when used in dark locations.
• The higher the sensitivity, the more noise and color unevenness may occur in
the monitor image and/or captured image.
• If you continue shooting for a prolonged period, the internal temperature of
the camera may increase, resulting in lower quality images. It is
recommended that you turn off the camera when not shooting. To prevent the
image quality from degrading, allow enough time for the camera to cool down
while shooting with long exposures or recording movies.
• If the internal temperature of the camera becomes high, l (temperature
warning) is displayed and Live View may not be available. If this happens,
stop shooting or use the viewfinder.
You can change the Live View display settings in [Live View] of the [A Rec.
Mode 4] menu. (p.107)