Filter
Top Products
117
2
Taking Pictures
1
Press the Movie button in still-picture capture mode.
Recording starts.
2
Press the Movie button.
Recording stops.
Change the movie settings in the [C Movie] menu.
1
Press the 3 button in movie mode.
The [C Movie 1] menu appears.
2
Use the four-way controller (23)
to select an item and change its
setting.
3
Press the 3 button after changing the setting.
The setting is saved and the camera returns to capture status.
• When recording starts using the Movie button, the number of recorded
pixels is fixed to 1920×1080 and the frame rate 30 fps.
• [Movie SR] (Movie Shake Reduction) is fixed to O (On).
• The recorded area of a movie becomes smaller, both horizontally and
vertically, than the image shown on the display before recording.
Changing the Movie Settings
Movie button
1
MENU
Full
HD
Exit
Exit
Custom Image
Custom Image
Recorded Pixels
Recorded Pixels
Movie SR
Movie SR
Wind Suppression
Wind Suppression
Enable Autofocus
Enable Autofocus
Enable Optical Zoom
Enable Optical Zoom