Filter
Top Products
159
4
Editing and Printing Images
4
Use the four-way controller (23)
to choose a parameter you want to
change.
You can select a different image by turning
the e-dial.
The following parameters can be changed.
5
Use the four-way controller (45) to change the value.
Press the four-way controller (5) to display the setting screen for
White Balance and Custom Image.
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller (23) to select [Save as],
and press the 4 button.
The RAW image is developed and saved as a new image.
8
Use the four-way controller (23) to select [Continue]
or [Exit], and press the 4 button.
Select [Continue] to edit other images. The screen for selecting the
parameter in Step 4 appears again.
Parameter Value Page
Aspect Ratio
D/E/F/G
p.98
JPEG Recorded Pixels
JPEG recorded pixels corresponding to
the aspect ratio
p.99
JPEG Quality Fine/Normal p.100
Custom Image
Bright/Natural/Vibrant/Reversal Film/
Monochrome
p.110
White Balance
F/G/H/^/JD/JN/JW/JL/
I/L/K
p.100
Sensitivity -1.0 to +1.0 —
Shadow Correction On/Off p.104
Distortion Corr. On/Off p.106
OK
OK
Capture Settings
Capture Settings