Filter
Top Products
185
5
Settings
You can automatically transfer images to a computer or similar devices
via wireless LAN using a commercially available Eye-Fi card. For details
on transferring images, refer to “Transferring Images Using an Eye-Fi
Card” (p.201). The default setting is P (Off).
1
Use the four-way controller (23) to select [Eye-Fi] in
the [W Setting 3] menu.
2
Use the four-way controller (45) to switch between O
and P.
O Communicates using an Eye-Fi card.
P Does not communicate using an Eye-Fi card.
3
Press the 4 button.
The setting is saved.
Adjusts the brightness and the tone of colors of the display.
1
Use the four-way controller (23) to select [LCD
Settings] in the [R Setting 3] menu, and press the four-
way controller (5).
The [LCD Settings] screen appears.
2
Use the four-way controller (23)
to select [Brightness Level],
[Adjust: Blue-Amber] or [Adjust:
Green-Magenta].
Setting Eye-Fi Communication
To establish Eye-Fi communication, you first have to specify a wireless
LAN access point and transfer destination on the Eye-Fi card. For details
on how to set up the card, refer to the operating manual supplied with the
Eye-Fi card.
Adjusting the Brightness and the Tone of Colors
of the Display
LCD Settings
LCD Settings
Brightness Level
Brightness Level
Cancel
Cancel
OK
OK