Filter
Top Products
158
4
Editing and Printing Images
2
Press the 3 button.
The screen returns to the previous screen.
3
Press the 4 button.
Proceed to Step 11 on p.155.
You can convert captured RAW images into JPEG images, and save
them as a new file.
1
Select a RAW image in playback mode, and press the
four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller (2345) to select
h (RAW Development), and press the 4 button.
The screen to select a development method is displayed.
3
Use the four-way controller (23)
to select [Develop single image],
and press the 4 button.
The parameters recorded in the image file
appear.
Proceed to Step 6 if you do not need to
change the parameters.
Developing | Images
Only RAW images captured with this camera can be edited. RAW
images and JPEG images captured with other cameras cannot be edited
on this camera.
To Develop One RAW Image
OK
OK
Develop single image
Develop single image
Develop multiple images
Develop multiple images
Cancel
Cancel