Filter
Top Products
29
1
Getting Started
Powering the Camera
Use the rechargeable lithium-ion battery D-LI108 that is provided with
the camera.
1
Make sure that the camera is turned off and open the
battery/card cover.
Slide the battery/card cover in the direction indicated by the arrow 1
and flip the cover open 2.
2
Push the battery lock lever in the direction of the arrow
3 and insert the battery so that the PENTAX logo is
facing the lens side of the camera.
Match the marks on the battery to the marks inside the battery
compartment and push the battery in until it is locked in place.
Installing the Battery
Battery/card cover
Battery lock lever
Battery