Pentax 14071 Digital Camera User Manual


 
32
1
Getting Started
Image Storage Capacity, Movie Recording Time, and Playback
Time
(at 23°C with the display on and the battery fully charged)
*1 Image Storage Capacity shows the approximate number of shots
recorded during CIPA-compliant testing (with display on, flash used for
50% of the shots, and 23 degrees centigrade). Actual performance may
vary according to operating conditions.
*2 According to the result of in-house testing.
Do not use the power adapter D-PA116 to charge batteries other than
the rechargeable lithium-ion battery D-LI108, as the adapter may
overheat or be damaged.
Make sure that the battery has been inserted correctly and the cable
is connected properly if the self-timer lamp blinks.
Replace the battery with a new one in the following cases:
- If the battery starts to run down more quickly (the battery may have
reached the end of its service life)
- If the self-timer lamp does not light or blinks even after being
charged (the battery may be faulty)
The time required to fully charge the battery is about 130 minutes (at
room temperature of 25°C). However, the charging time may vary
depending on the ambient temperature and charging conditions. The
appropriate ambient temperature for charging the battery is 0°C to
40°C (32°F to 104°F).
The rechargeable lithium-ion battery D-LI108 can also be charged
using the optional battery charger D-BC108.
The battery cannot be charged using a computer or similar devices. Do
not attempt to charge the battery by connecting the USB cable to a
computer.
Image Storage Capacity
*1
(flash used for 50% of shots)
Movie Recording Time
*2
Playback Time
*2
Approx. 200 pictures Approx. 70 min. Approx. 130 min.
In general, battery performance may temporarily deteriorate as the
temperature decreases.
Be sure to take a spare battery with you when traveling abroad or to a
cold region, or if you intend to take a lot of pictures.