Filter
Top Products
78
3
Taking Pictures
Have a blank sheet of white paper or similar material ready.
1
In the [White Balance] screen, use the four-way
controller (23) to select K (Manual).
2
Point the camera at the blank sheet of paper or other
material so that it fills the frame displayed in the center
of the screen.
3
Press the shutter release button fully.
The white balance is automatically adjusted.
4
Press the 4 button.
The setting is saved and the [
A
Rec. Mode] menu reappears.
You can select the sensitivity to suit the brightness of the surroundings.
1
Use the four-way controller (23) to select [Sensitivity]
in the [A Rec. Mode] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to change the
sensitivity.
To Set the White Balance Manually
Setting the Sensitivity
Auto The sensitivity is automatically adjusted by the camera. (Sensitivity 64 - 800)
64
The lower the sensitivity, the less noise that affects the image. The
shutter speed will be slower in low light conditions.100
200
400
800
1600
Higher sensitivity settings use faster shutter speeds in low light
conditions to reduce camera shake, but the image may be affected by
noise.
3200
6400