Pentax 30 Digital Camera User Manual


 
102
7
Appendix
Troubleshooting
Problem Cause Remedy
Power will
not come
on
Battery is not
installed
Check battery is installed.
If not, install battery.
Battery / card cover is
open
Close the battery / card cover.
Battery is installed
incorrectly
Check orientation of battery. Reinsert
battery according to the +- symbols in
the battery compartment. (p.12)
Battery power is low Insert a charged battery or use the AC
adapter.
No image
on the
LCD
monitor
Camera is connected
to PC with USB cable
The LCD monitor is always off when the
camera is connected to a PC.
Image is displayed
but is hard to see
Images on the LCD monitor may be hard
to see when taking pictures outside in
sunlight.
Shutter
will not
release
Flash is charging When viewfinder lamp blinks red, flash is
charging and no pictures can be taken.
The lamp turns off when charging is
completed.
No available space on
SD Memory Card or in
Built-in memory
Insert an SD Memory Card with available
space, or delete unwanted images.
(p.15, 78)
Recording Wait until recording is finished.