Pentax 30 Digital Camera User Manual


 
58
4
Taking Pictures
eHJLICKEK
Pictures are taken continuously while the shutter release button is pressed.
There are two available modes: Continuous Shooting and Multi Continuous Shooting.
1 Press the four-way controller (2)
to display j or _ on the LCD
monitor.
2 Press the shutter release button
halfway.
The focus frame on the LCD monitor will
light green when the camera is in focus.
3 Press the shutter release button.
j
Pictures will be taken continuously while the shutter release button is pressed.
Shooting stops when you remove your finger from the shutter release button.
_
Pictures are taken four frames at a time and saved as a single image.
Continuous Shooting (Continuous Shooting /
Multi Continuous Shooting)
j
Continuous Shooting
Images are captured, processed and saved one by one.
_
Multi Continuous Shooting Pictures are taken four frames at a time and saved as a single image.
Playing Back Still Pictures 1p.24
You can continue shooting until the SD Memory Card is full.
The interval will vary according to the [Recorded Pixels] and [Quality Level] setting.
The recorded pixels are fixed at 1280 × 960 in Multi Continuous Shooting mode.
The flash will not discharge in Continuous Shooting or Multi Continuous Shooting mode.
Continuous Shooting and Multi Continuous Shooting are not available for
Movie Picture, Panorama Assist, Night-Scene or Night-Scene Portrait mode.
2, 3
1
3
10/10/2004
10/10/2004
11:20
11:20
10/10/2004
11:20