Filter
Top Products
11
Basic Operations
How to capture an image?
To capture an image, perform the following:
1. Turn on the camera.
2. Set the Operating Mode Dial to CAPTURE
.
LED1 will be on under Capture mode.
3. Use the viewfinder window or LCD Monitor
to frame the image.
Press the Display button to turn on the LCD
Monitor for usage.
4. Press the Shutter button.
LED1 will blink while capturing images.
How to playback images?
You can review the captured images either on
the LCD Monitor or on a TV. To playback
images, perform the following:
To playback the image in CF card, make sure to in
sert the card before the image review.
To playback the image in the camera (internal
memory), do not insert any CF card or the camera
will not be able to read the internal data with an
external memory card attached.
On the LCD Monitor
1. Turn on the camera.
2. Set the Operating Mode Dial to PLAY .
3. The last image captured appears. Use the
arrow buttons (/) to go forward or
backward through the captured images.
On a TV
1. Connect one end of the video cable I-VC4
(Optional) to the VIDEO port of your camera.
2. Connect the other end of the cable to the
VIDEO port of your television.
3. Turn on the camera and the TV.
Set the video output format before connect-
ing to a TV.
4. Set the Operating Mode Dial to PLAY
mode.
5. Use the arrow buttons (/) to forward/
backward through the captured images.
How to delete images?
To delete images, perform the following:
1. Turn on the camera.
2. Set the Operating Mode Dial to DELETE .
3. You can select either to delete all the
captured images or a single image by the