Filter
Top Products
8
Although the level of functioning pixels is 99.
99% or better, you should be aware that 0.
01% of fewer of the pixels may not illumi-
nate or may illuminate when they should not.
However, this has no effect on the captured
image.
Handling of the CF Card
The CF card should only be installed or
ejected when the power for the camera is
off.
Never eject a CF card or turn off the power
during the data storage process or commu-
nication with another device. This could
cause damage to the data or the card.
Do not bend a CF card or subject it to a strong
shock. Do not expose it to water nor leave it
place of high temperature.
Be sure to format before using an unused
CF card or a card used on another camera.
Never attempt to eject a CF card while it is
being formatted. If you do so, the card would
be fatally damaged.
It is possible for data stored in the CF card
to be erased under the following conditions,
so please take care. Please be aware that
Pentax bears absolutely no responsibility for
erased data.
*Mishandling of the CF card by the user.
*CF card located where it may be susceptible to static
electricity or electrical noise.
*If the card not used for a long period of time.
*If the card ejected or power supply disconnected while
the card access lamp is blinking.
*The CF card has a limited lifespan. The stored data
may become corrupted if the memory card is not used
for a long period of time. Ensure that necessary data
is backed up to a personal computer etc. on a regular
basis.
Avoid using or storing in places where static
electricity or electrical noise is likely to occur.
Avoid using or storing in places where there
are sudden temperature variations or
condensation, or in direct sunlight.