Filter
Top Products
14
3. Select the WHITE BALANCE item by the
arrow buttons (/) and then press the OK
button to confirm.
4. Use the arrow buttons (/) to select the
desired white balance setting.
5. Press the OK button again to make the
change. The cursor returns to the CAPTURE
MENU.
This setting is reset to AUTO when the camera power is
off.
How to set the OSD (On-Screen
Display) language?
To set the OSD language, perform the
following:
1. Set the Operating Mode Dial to SETUP.
2. The Setup menu appears.
3. Select the LANGUAGE item by the arrow
buttons (/) and then press the OK
button to confirm.
4. Use the arrow buttons (/) to select the
language.
5. Press the OK button again to make the
change. The cursor returns to the SETUP
MENU.
How to set the Self-Timer?
To use the Self-Timer function, perform the
following:
1. Set the Operating Mode Dial to CAPTURE .
2. Press the Self-Timer button to set the
Self-Timer on. appears on the status LCD.
3. Press the Shutter button.
4. After 10 seconds, an image is captured and
the timer will turn itself off.
The Self-Timer is located in front of the camera, and it is
designed to count down for 10 seconds. In the first 7
seconds, the indicator lights up and then blinks rapidly
for the last 3 seconds.
How to format the Internal
Memory or CF (CompactFlash)
card?
Perform the following procedures:
1. Set the Operating Mode Dial to SETUP.
2. Select the FORMAT CARD item by the
arrow buttons (/) and then press the OK
button to confirm.
3. Use the arrow buttons (/) to select
FORMAT.
4. Press the OK button again to re-format the
internal memory or CF card. The cursor
returns to the SETUP MENU.