Pentax H01-201106 Digital Camera User Manual


 
194
Changing Additional Settings
8
3
Use the four-way controller (45) to adjust the value.
Press the d/i button to reset the adjustment value. (Available only
when [Green Button] is assigned to the d/i button in [Green Button] of
the [A Rec. Mode 3] menu) (p.144).).
4
Press the 4 button.
5
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
Pixel Mapping is a function for mapping out and correcting defective pixels
in the CMOS sensor.
1
Select [Pixel Mapping] in the [R Set-up 3] menu, and press
the four-way controller (5).
The [Pixel Mapping] screen appears.
2
Use the four-way controller (23) to select [Pixel
Mapping], and press the 4 button.
Defective pixels are mapped and corrected, and the screen that was
displayed before selecting the menu appears again.
Correcting Defective Pixels in the CMOS Sensor
(Pixel Mapping)
When the battery level is low, [Not enough battery power remaining to activate
Pixel Mapping] is displayed on the monitor. Use the AC adapter kit K-AC115
(optional) or install a fully charged battery.