Pentax H01-201106 Digital Camera User Manual


 
216
Using the Flash
10
You can use the P-TTL auto flash with the AF540FGZ, AF360FGZ,
AF200FG or AF160FC flash unit.
1
Remove the cover of the hot shoe, and attach the external
flash.
2
Turn on the camera and the external flash.
3
Set the external flash mode to [P-TTL].
4
Confirm that the external flash is fully charged, and then
take a picture.
Using P-TTL Mode
The maximum sync speed available with an external flash is 1/250 sec.
P-TTL auto flash is only available with an AF540FGZ, AF360FGZ, AF200FG
or AF160FC flash unit.
For details such as operation method and effective distance, please refer to
the external flash manual.
The flash does not discharge if the subject is bright enough when the flash
mode is set to C or i. Therefore, it may not be suitable for daylight-sync
shooting.
Never pop up the built-in flash manually when any external flash unit is
attached to the camera. The built-in flash will hit the external flash.
Red-eye Reduction
As with the built-in flash, the red-eye reduction function is available
with an external flash. The red-eye reduction function works by
discharging the flash twice even when only an external flash is used.
However, this function may not be available on some flashes or may
have restrictions for usage conditions. Refer to the chart on p.215.