Pentax H01-201106 Digital Camera User Manual


 
97
Shooting Functions
4
3
Use the four-way controller (45)
to select k or l, and press
the 4 button.
The camera returns to the control panel.
4
Press the shutter release button halfway.
k appears on the monitor and the
Shake Reduction function is activated.
k Uses Shake Reduction. (default setting)
l
Does not use Shake Reduction.
Be sure to turn the Shake Reduction function off when using the camera with
a tripod.
You can also change the setting from the [A Rec. Mode 3] menu (p.66).
[Shake Reduction] is fixed to
l
in the following situations.
- Self-timer shooting
- Remote Control shooting
- when the shutter speed is set to h
[Shake Reduction] is fixed to k when the capture mode is set to Z (Night
Scene HDR) or p (HDR) of H (Scene) mode.
You can select whether to use the Shake Reduction function only when
taking pictures or during standby mode as well with [4. Shake Reduction
Options] (p.68) from the [A Custom Setting 1] menu.
The Shake Reduction function will not fully work (for about 2 seconds) right
after turning on the camera or restoring from Auto Power Off. Wait for the
Shake Reduction function to work stably and properly, and then press the
shutter button gently.
The Shake Reduction function is available with any PENTAX Q-mount lens
compatible with this camera.
Shake Reduction
Shake Reduction
On
On
Cancel
Cancel
OK
OK
OK
MENU
1/
2000
1/
2000
F2.8
F2.8
1600
1600
[
37
]
[
37
]